Agilent Technologies Intuvo 9000 - Transfer the Checkout Sample to a Screw-Top Sample Vial

86 Agilent Intuvo 9000 GC Installation
1 Installing the GC
Transfer the checkout sample to a screw-top sample vial.
1 The checkout sample is contained in sealed glass vials. Wrap
a piece of cloth or a paper towel around the vial to protect
your fingers and snap the top off.
2 Use a pipette to transfer the sample to a 2-mL screw-top vial.
(If using an ALS, use a vial suitable for the ALS turret or
tray.)