Installing the GC 1
Agilent Intuvo 9000 GC Installation 91
If appropriate, update firmware.
Firmware maintenance is an ongoing process. Updates are
posted on the Agilent web site and may be downloaded to the
GC using the GC Firmware Update Tool.
While the GC shipped with the latest firmware version available
when it was manufactured, Agilent recommends that you check
for any updates and install them if available.
GC firmware
1 Install the GC Firmware Update Tool.
a Place the Agilent GC and GC/MS User Manuals & Tools
DVD into your PC’s DVD drive.
b Open file <D:>/index.html, where <D:> is the name of the
DVD drive.
c Click the GC Firmware Update Tool icon. (If your browser
does not start the installer, browse to the DVD and run file
<DVD drive letter>:\tools\GCFWUpdate\setup.exe.)
d Read the instructions, then install the utility as described.
2 Check the GC firmware version. Touch Settings > About.
To Next Page
Loading...
Need help?
General
