Agilent Technologies Intuvo 9000 User Manual

40 Agilent Intuvo 9000 GC Installation
1 Installing the GC
Configure gases and detector-specific settings.
Select the gas types that will be connected to the GC.
If your GC detector includes other settings, for example a Lit
Offset value for a flame ionization detector (FID), accept the
default value for installation and checkout.
Touch Settings > Configuration > Inlet to set the inlet carrier
gas type and, for a multimode inlet, to select the cryo gas type.
Touch Settings > Configuration > Detectors to set the detector
gas type or types.

Agilent Technologies Intuvo 9000 Specifications

General

Brand	Agilent Technologies
Model	Intuvo 9000
Category	Laboratory Equipment
Language	English