8 Agilent Intuvo 9000 GC Installation
1 Installing the GC
Overview of Installation
Before installing the GC, read the important safety information
in the Agilent Intuvo 9000 Gas Chromatograph Safety
Information manual (provided with the GC) and the Safety
manual (available from the Agilent GC and GC/MS User
Manuals & Tools DVDs).
Purpose of this procedure
This procedure ensures that instruments and systems are
installed and functioning as designed. Correct installation is the
first step in ensuring that instruments and systems operate
reliably over their lifetimes.
Customer responsibilities
1 Make sure your site meets the basic requirements, including
the necessary space, electrical outlets, gases, tubing,
operating supplies, consumables and other usage-dependent
items required for a successful installation. Refer to the
Agilent Intuvo 9000 GC, GC/MS, and ALS Site Preparation
Guide.
2 If Agilent is delivering installation and familiarization
services, users of the instrument should be present
throughout these services; otherwise, these users will miss
important operational, maintenance, and safety information.
Additional information is available via the GC Touchscreen,
Browser Interface help & information suite, and the Agilent GC
and GC/MS User Manuals & Tools DVDs and through the
instrument’s website.
Once the GC is turned on, open a browser and connect to the
instrument's help and information system.
If your site complies with all site preparation specifications, the
average installation time for the GC is about 2 hours. Allow
more time for any additional products (for example, an ALS),
add-ons, and software.
About Agilent’s installation service
The installation service does not include:
• Network setup with other computers or to the site or
building LAN.
To Next Page
Loading...
Need help?
General
