Agilent Technologies Intuvo 9000 User Manual

Installing the GC 1
Agilent Intuvo 9000 GC Installation 73
Install the Intuvo inlet chip and Guard chip
1 Install the inlet chip.
a Remove the inlet cover.
b Slide open the Guard chip cover to expose the Guard chip
compression bolt.
c Using the Intuvo torque driver, loosen the Guard chip
compression bolt until there is a clear space between the
bottom of the bolt and the little bus. (Access the Guard
Inlet cover

Agilent Technologies Intuvo 9000 Specifications

General

Brand	Agilent Technologies
Model	Intuvo 9000
Category	Laboratory Equipment
Language	English