92 Agilent Intuvo 9000 GC Installation
1 Installing the GC
3 Check for any available firmware updates. Go to the Agilent
web site at http://www.chem.agilent.com.
• If the available firmware version is newer than the version
on the GC, download it.
• If no firmware or help updates are available, skip to the
next section.
4 Verify that if a new firmware version is available, it is
compatible with the current hardware and software. For
example, verify that any data system is compatible with the
new firmware. If the new firmware is not compatible or
acceptable for any reason, skip to the next section.
5 If available, install any available firmware updates.
To Next Page
Loading...
