Agilent Technologies U1252B User Manual

Changing The Default Setting 4
Agilent U1251B/U1252B User’s and Service Guide 85
Setting Auto Power Saving Mode
• The timer for APF (Auto Power OFF) can be set for the
range of 1—99 minutes.
• To activate the meter after it has “auto powered- off”, turn
the rotary switch to the OFF position. Then turn it back
on again.
• will be shown on the display during subsequent
measurements.

Agilent Technologies U1252B Specifications

General

Brand	Agilent Technologies
Model	U1252B
Category	Multimeter
Language	English