Agilent Technologies U1252B - 4 Changing the Default Setting; Selecting Setup Mode

74 Agilent U1251B/U1252B User’s and Service Guide
4 Changing The Default Setting
Selecting Setup Mode
To enter the Setup mode, perform the following steps:
1 Turn the meter OFF.
2 From the OFF position, press and hold while
turning the rotary switch to any non- OFF position.
To change a menu item setting in Setup mode, perform the
following steps:
1 Press or to scroll through the menu items.
2 Press or to scroll through the available settings.
See Table 4- 1, “Available setting options in Setup mode,”
for details of available options.
3 Press to save changes. These parameters will
remain in the non- volatile memory.
4 Press for more than 1 second to exit Setup mode.
NOTE
When you hear a beep, the meter is in Setup mode and you can release
.