Agilent Technologies U1252B - Adjusting the Tilt-Stand; Figure 1-1 Tilt-Stand at 60; Figure 1-2 Tilt-Stand at 30

Getting Started Tutorial 1
Agilent U1251B/U1252B User’s and Service Guide 4
Adjusting the tilt-stand
To adjust the meter to a 60° standing position, pull the
tilt- stand outwards to its maximum reach.
Figure 1-1 Tilt-stand at 60
°
To adjust the meter to a 30
° standing position, bend the tip
of the stand so that it is parallel to the ground before
pulling the stand outwards to its maximum reach.
Figure 1-2 Tilt-stand at 30
°
To P C ( h o st )
Tilt-stand at 60°
IR-USB cable
To P C (ho s t)
Tilt-stand at 30
º
IR-USB cable