Features and Functions 3
Agilent U1251B/U1252B User’s and Service Guide 65
Reviewing logged data
1 Press for more than 1 second to enter the Log
Review mode. The last recorded entry and the last logging
index are displayed.
2 Press to switch between hand (manual) and
interval (automatic) logging review mode.
3 Press to ascend or to descend through the logged
data. Press to select the first record and press to
select the last record for quick navigation.
4 Press for more than 1 second at the respective Log
Review mode to clear logged data.
5 Press for more than 1 second to exit mode.
6 During the data review in either manual or interval
logging mode, press for more than one second to
clear all the logged values.
To Next Page