Changing The Default Setting 4
Agilent U1251B/U1252B User’s and Service Guide 77
Menu item Available setting options
Default factory setting
Display Description Display Description
[4]
Te m p e r a t u r e
d-CF
Sets the temperature
measurement to °C but
pressing
swaps the display to °F
d-C
d-F
Sets the temperature
measurement to °F
d-FC
Sets the temperature
measurement to °F but
pressing
swaps display to °C
d-C
Sets the temperature
measurement to °C
Notes for setting options in Setup mode:
1 This is the first option displayed once the user enters Setup mode.
2 For b-Lit, APF, rEF and d-LoG menu items, the user can select the digit to be adjusted by pressing .
3 This menu option is only available for the U1252B.
4 To view the tEMP menu item, press
Tab l e 4-1 Available setting options in Setup mode (continued)
for more than 1 second.
To Next Page
Loading...
