Agilent Technologies U1253B User Manual

Making Measurements 2
U1253B User’s and Service Guide 57
Input warning
The multimeter emits a continuous beep when the test lead
is inserted to the A input terminal but the rotary switch is
not set to the corresponding mA.A position. A warning
message Error ON A INPUT will be displayed until the test lead
is removed from the A input terminal. Refer to Figure 2- 18.
Figure 2-18 Input terminal warning

Agilent Technologies U1253B Specifications

General

Brand	Agilent Technologies
Model	U1253B
Category	Multimeter
Language	English