Agilent Technologies U1253B User Manual

58 U1253B User’s and Service Guide
2 Making Measurements
Charge terminal alert
The multimeter emits a continuous beep when the
terminal detects a voltage level of more than 5 V and the
rotary switch is not set to the corresponding position.
A warning message Error ON mA INPUT will be displayed until
the lead is removed from the input terminal.
Refer to Figure 2- 19 below.
Figure 2-19 Charge terminal alert

Agilent Technologies U1253B Specifications

General

Brand	Agilent Technologies
Model	U1253B
Category	Multimeter
Language	English