K65C/K75C/K95C
8-7
K65C/K75C/K95C
8-7
8.2.8 Checking the oil level
in the rear axle
8.2.8.1Slow loader
» 20 km/h «
(1) Unscrew the plug from the axle
arch (8-9/arrow).
NOTE
- The oil level must reach the plug
bore.
- Collect any oil that escapes.
(2) Screw in the plug again.
(3) Unscrew the plug from the
intermediate gear (8-10/arrow).
NOTE
- The oil level must reach the plug
bore.
- Collect any oil that escapes.
(4) Screw in the plug again.
8.2.8.2Fast loader
» 30 km/h «
(1) Unscrew the plug from the axle
arch (8-11/arrow).
NOTE
- The oil level must reach the plug
bore.
- Remove any oil that escapes.
(2) Screw in the plug again.
Figure 8-9
Figure 8-10
Figure 8-11
8.2.8 Checking the oil level
in the rear axle
8.2.8.1Slow loader
» 20 km/h «
(1) Unscrew the plug from the axle
arch (8-9/arrow).
NOTE
- The oil level must reach the plug
bore.
- Collect any oil that escapes.
(2) Screw in the plug again.
(3) Unscrew the plug from the
intermediate gear (8-10/arrow).
NOTE
- The oil level must reach the plug
bore.
- Collect any oil that escapes.
(4) Screw in the plug again.
8.2.8.2Fast loader
» 30 km/h «
(1) Unscrew the plug from the axle
arch (8-11/arrow).
NOTE
- The oil level must reach the plug
bore.
- Remove any oil that escapes.
(2) Screw in the plug again.
Figure 8-9
Figure 8-10
Figure 8-11