ahlmann AL 65 - Machine; Engine; Starter; Alternator

K65C/K75C/K95C 3-7 K65C/K75C/K95C 3-7
3.3 AL 95
NOTE
The technical data refer to tires of size 14.5 - 20.
3.3.1 Machine
- Height 2720 mm
- Width (over tires) 1823 mm
- Wheel base 1950 mm
- Track width 1440 mm
- Operating weight without attachment 5050 kg
- Ground clearance - vehicle centre 467 mm
- rear axle gear 340 mm
- Turning radius (across the rear) 3800 mm
- Articulation angle - left 40 °
- right 40 °
- Climbing ability with payload 60 %
- Max. lifting capacity 51 kN
3.3.2 Engine
- Oil-/air-cooled diesel engine
- 4 cylinders, 4-stroke, direct injection
- Displacement 2732 cm
3
- Power acc. to ISO 9249 51.5 kW at 2500 rpm
3.3.3 Starter
- 2.2 kW, 12 V
3.3.4 Alternator
- 60 A, 14 V
3.3.5 Hydrostatic traction drive
"20 km/h" model
- Stage I 0........7 km/h
- Stage II 0......20 km/h
"30 km/h" model
Gear stage 1
- Stage I 0........7 km/h
- Stage II 0......14 km/h
3.3 AL 95
NOTE
The technical data refer to tires of size 14.5 - 20.
3.3.1 Machine
- Height 2720 mm
- Width (over tires) 1823 mm
- Wheel base 1950 mm
- Track width 1440 mm
- Operating weight without attachment 5050 kg
- Ground clearance - vehicle centre 467 mm
- rear axle gear 340 mm
- Turning radius (across the rear) 3800 mm
- Articulation angle - left 40 °
- right 40 °
- Climbing ability with payload 60 %
- Max. lifting capacity 51 kN
3.3.2 Engine
- Oil-/air-cooled diesel engine
- 4 cylinders, 4-stroke, direct injection
- Displacement 2732 cm
3
- Power acc. to ISO 9249 51.5 kW at 2500 rpm
3.3.3 Starter
- 2.2 kW, 12 V
3.3.4 Alternator
- 60 A, 14 V
3.3.5 Hydrostatic traction drive
"20 km/h" model
- Stage I 0........7 km/h
- Stage II 0......20 km/h
"30 km/h" model
Gear stage 1
- Stage I 0........7 km/h
- Stage II 0......14 km/h