ahlmann AL 65 - Switching off the Heating and Ventilation System; Leaving the Loader; Adjusting the Operators Seat

5-10 K65C/K75C/K95C 5-10 K65C/K75C/K95C
3
2
4
1
2
1
3
2
4
1
2
1
Figure 5-9
Figure 5-8
5.3.3 Switching off the
heating and ventilation
system
(1) Shut off the warm air supply
(5-7/arrow).
(2) Turn the rotary switch (5-5/
arrow) for the blower to position "0".
5.3.4 Leaving the loader
(1) Close the ball block valve for
the work and auxiliary hydraulics
(1-3/arrow).
(2) Remove the ignition key and
lock the doors.
(3) Remove the battery main
switch (4-11/3).
5.4 Adjusting the
operator's seat
(1) Adjust or swing forward the
back support using the hand lever
(5-8/2).
(2) Adjust the rear seat height and
inclination by pulling the hand lever
(5-8/3) upwards.
(3) Adjust the front seat height and
inclination by pulling the hand lever
(5-8/4) upwards.
(4) Adjust the height of the arm
rest by turning the knob (5-8/1).
(5) The seat suspension can be
adjusted to the driver's weight
(40 ... 130 kg) using the hand wheel
(5-9/1).
(6) The operator's seat can be
adjusted in the horizontal direction
to suit the driver's requirements by
pulling the handle (5-9/2) upwards
and moving the seat forward or
backward.
Figure 5-9
Figure 5-8
5.3.3 Switching off the
heating and ventilation
system
(1) Shut off the warm air supply
(5-7/arrow).
(2) Turn the rotary switch (5-5/
arrow) for the blower to position "0".
5.3.4 Leaving the loader
(1) Close the ball block valve for
the work and auxiliary hydraulics
(1-3/arrow).
(2) Remove the ignition key and
lock the doors.
(3) Remove the battery main
switch (4-11/3).
5.4 Adjusting the
operator's seat
(1) Adjust or swing forward the
back support using the hand lever
(5-8/2).
(2) Adjust the rear seat height and
inclination by pulling the hand lever
(5-8/3) upwards.
(3) Adjust the front seat height and
inclination by pulling the hand lever
(5-8/4) upwards.
(4) Adjust the height of the arm
rest by turning the knob (5-8/1).
(5) The seat suspension can be
adjusted to the driver's weight
(40 ... 130 kg) using the hand wheel
(5-9/1).
(6) The operator's seat can be
adjusted in the horizontal direction
to suit the driver's requirements by
pulling the handle (5-9/2) upwards
and moving the seat forward or
backward.