ahlmann AL 65 - Machine; Engine; Starter; Alternator

3-4 K65C/K75C/K95C 3-4 K65C/K75C/K95C
3.2 AL 75
NOTE
The technical data refer to tires of size 365/80 R 20.
3.2.1 Machine
- Height 2695 mm
- Width (over tires) 1840 mm
- Wheel base 1950 mm
- Track width 1440 mm
- Operating weight without attachment 4620 kg
- Ground clearance - vehicle centre 457 mm
- rear axle gear 330 mm
- Turning radius (across the rear) 3800 mm
- Articulation angle - left 40 °
- right 40 °
- Climbing ability with payload 60 %
- Max. lifting capacity 41 kN
3.2.2 Engine
- Oil-/air-cooled diesel engine
- 4 cylinders, 4-stroke, direct injection
- Displacement 2732 cm
3
- Power acc. to ISO 9249 44 kW at 2300 rpm
3.2.3 Starter
- 2.2 kW, 12 V
3.2.4 Alternator
- 60 A, 14 V
3.2.5 Hydrostatic traction drive
"20 km/h" model
- Stage I 0........7 km/h
- Stage II 0......20 km/h
"30 km/h" model
Gear stage 1
- Stage I 0........7 km/h
- Stage II 0......15 km/h
3.2 AL 75
NOTE
The technical data refer to tires of size 365/80 R 20.
3.2.1 Machine
- Height 2695 mm
- Width (over tires) 1840 mm
- Wheel base 1950 mm
- Track width 1440 mm
- Operating weight without attachment 4620 kg
- Ground clearance - vehicle centre 457 mm
- rear axle gear 330 mm
- Turning radius (across the rear) 3800 mm
- Articulation angle - left 40 °
- right 40 °
- Climbing ability with payload 60 %
- Max. lifting capacity 41 kN
3.2.2 Engine
- Oil-/air-cooled diesel engine
- 4 cylinders, 4-stroke, direct injection
- Displacement 2732 cm
3
- Power acc. to ISO 9249 44 kW at 2300 rpm
3.2.3 Starter
- 2.2 kW, 12 V
3.2.4 Alternator
- 60 A, 14 V
3.2.5 Hydrostatic traction drive
"20 km/h" model
- Stage I 0........7 km/h
- Stage II 0......20 km/h
"30 km/h" model
Gear stage 1
- Stage I 0........7 km/h
- Stage II 0......15 km/h