ahlmann AL 65 - Towing the Articulated Loader if the Engine Has Failed

7-2 K65C/K75C/K95C 7-2 K65C/K75C/K95C
Figure 7-1
7.1.1.1Towing the articu-
lated loader if the engine has
failed
(1) Press the toggle switch for the
hazard flasher (4-13/10).
(2) Set the drive switch (4-12/6) to
position "0".
(3) Apply the parking brake
(4-12/3).
CAUTION
If the rescue location is on a slope,
wheel chocks must be placed on
the sloping side of both front axle
wheels in addition to applying the
parking brake.
NOTE
The preparations described in steps
(4) and (5) are only necessary if the
rescue location is not on a public
road:
(4) Cover the bucket cutting edge
and teeth with the bucket protector
(5-2/arrow).
(5) Insert the plug of the bucket
protector into the socket (5-3/arrow).
(6) Push the valve lever for the
working hydraulics (4-12/5) beyond
its pressure point into the forward
position.
(7) Using a suitable lifting device,
e.g. a second articulated loader with
an attached bucket, lift the bucket
arm of the articulated loader to be
towed until the bucket arm support
can be inserted into the loader to be
towed (7-1).
Figure 7-1
7.1.1.1Towing the articu-
lated loader if the engine has
failed
(1) Press the toggle switch for the
hazard flasher (4-13/10).
(2) Set the drive switch (4-12/6) to
position "0".
(3) Apply the parking brake
(4-12/3).
CAUTION
If the rescue location is on a slope,
wheel chocks must be placed on
the sloping side of both front axle
wheels in addition to applying the
parking brake.
NOTE
The preparations described in steps
(4) and (5) are only necessary if the
rescue location is not on a public
road:
(4) Cover the bucket cutting edge
and teeth with the bucket protector
(5-2/arrow).
(5) Insert the plug of the bucket
protector into the socket (5-3/arrow).
(6) Push the valve lever for the
working hydraulics (4-12/5) beyond
its pressure point into the forward
position.
(7) Using a suitable lifting device,
e.g. a second articulated loader with
an attached bucket, lift the bucket
arm of the articulated loader to be
towed until the bucket arm support
can be inserted into the loader to be
towed (7-1).