ahlmann AL 65 - Identifying Features on the Loader; Parking the Loader

K65C/K75C/K95C 10-1 K65C/K75C/K95C 10-1
Figure 10-2
Figure 10-3
Figure 10-1
10 Protection against
theft
Instances where construction
machines were stolen have con-
siderably increased in recent years.
To make it possible for the police,
customs and other authorities to
find and identify machines much
faster, Ahlmann construction
machines are fitted with the
following identifying features:
10.1 Identifying features
on the loader
(1) Loader type plate (10-1/arrow).
Among other details, the loader type
plate also gives the 17-digit FIN
number (truck identification number)
starting with W09.
(2) The FIN number is also
stamped into the front part (10-2/
arrow) and the rear part (10-3/arrow)
of the loader.
(3) ROPS plate (10-4/arrow).
This plate gives the name of the
manufacturer as well as details on
the ROPS type, the loader type and
the permissible overall weight.
10.2 Parking the loader
(1) Turn the steering wheel fully
to the left or the right.
(2) Apply the parking brake
(4-12/3).
(3) Tip the quick-change device
until
- the tines of the bucket,
- the tines of the fork-lift
attachment or
- the boom of the lifting
hook
is placed on the ground.
Figure 10-2
Figure 10-3
Figure 10-1
10 Protection against
theft
Instances where construction
machines were stolen have con-
siderably increased in recent years.
To make it possible for the police,
customs and other authorities to
find and identify machines much
faster, Ahlmann construction
machines are fitted with the
following identifying features:
10.1 Identifying features
on the loader
(1) Loader type plate (10-1/arrow).
Among other details, the loader type
plate also gives the 17-digit FIN
number (truck identification number)
starting with W09.
(2) The FIN number is also
stamped into the front part (10-2/
arrow) and the rear part (10-3/arrow)
of the loader.
(3) ROPS plate (10-4/arrow).
This plate gives the name of the
manufacturer as well as details on
the ROPS type, the loader type and
the permissible overall weight.
10.2 Parking the loader
(1) Turn the steering wheel fully
to the left or the right.
(2) Apply the parking brake
(4-12/3).
(3) Tip the quick-change device
until
- the tines of the bucket,
- the tines of the fork-lift
attachment or
- the boom of the lifting
hook
is placed on the ground.