5-6
K65C/K75C/K95C
5-6
K65C/K75C/K95C
(11) Press the accelerator pedal
(4-10/3).
NOTE
- The loader starts. The travel
speed is determined by the posi-
tion of the accelerator pedal.
- The service brake is activated
by depressing the brake pedal
(4-10/2).
DANGER
Changing the travel direction during
driving is not allowed to avoid any
danger to other road users.
5.2.4 Working with the
loader
Normally, all work is executed in
hydraulic drive stage II (4-12/7) and
a gear stage that matches the
working conditions (4-13/13) » only
for fast loaders - 30 km/h «.
CAUTION
The drive stages of the distribution
gear may only be selected when
the loader is at a standstill
(4-13/13)
and only if the travel direction switch
(4-12/6) is set to "0" » only for fast
loaders - 30 km/h «.
For special tasks which ask for a
more sensitive control of the speed
or a higher engine speed at reduced
travel speed, hydraulic drive stage
"I" (4-12/7) can be selected. The
travel speed can thus be reduced
to 6 km/h (AL 65) or 7 km/h (AL 75
and AL 95).
(11) Press the accelerator pedal
(4-10/3).
NOTE
- The loader starts. The travel
speed is determined by the posi-
tion of the accelerator pedal.
- The service brake is activated
by depressing the brake pedal
(4-10/2).
DANGER
Changing the travel direction during
driving is not allowed to avoid any
danger to other road users.
5.2.4 Working with the
loader
Normally, all work is executed in
hydraulic drive stage II (4-12/7) and
a gear stage that matches the
working conditions (4-13/13) » only
for fast loaders - 30 km/h «.
CAUTION
The drive stages of the distribution
gear may only be selected when
the loader is at a standstill
(4-13/13)
and only if the travel direction switch
(4-12/6) is set to "0" » only for fast
loaders - 30 km/h «.
For special tasks which ask for a
more sensitive control of the speed
or a higher engine speed at reduced
travel speed, hydraulic drive stage
"I" (4-12/7) can be selected. The
travel speed can thus be reduced
to 6 km/h (AL 65) or 7 km/h (AL 75
and AL 95).
To Next Page
Loading...