EasyManua.ls Logo

ahlmann AL 65 - Machine; Engine; Starter; Alternator

Default Icon
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
K65C/K75C/K95C
3-1
K65C/K75C/K95C
3-1
3 Technical data
3.1 AL 65
NOTE
The technical data refer to tires of size 12.5 - 18.
3.1.1 Machine
- Height 2680 mm
- Width (over tires) 1791 mm
- Wheel base 1950 mm
- Track width 1450 mm
- Operating weight without attachment 4350 kg
- Ground clearance - vehicle centre 420 mm
- rear axle gear 300 mm
- Turning radius (across the rear) 3800 mm
- Articulation angle - left 40 °
- right 40 °
- Climbing ability with payload 60 %
- Max. lifting capacity 34 kN
3.1.2 Engine
- Oil-/air-cooled diesel engine
- 4 cylinders, 4-stroke, direct injection
- Displacement 2732 cm
3
- Power acc. to ISO 9249 37 kW at 2300 rpm
3.1.3 Starter
- 2.2 kW, 12 V
3.1.4 Alternator
- 60 A, 14 V
3.1.5 Hydrostatic traction drive
- Stage I 0........7 km/h
- Stage II 0......20 km/h
3 Technical data
3.1 AL 65
NOTE
The technical data refer to tires of size 12.5 - 18.
3.1.1 Machine
- Height 2680 mm
- Width (over tires) 1791 mm
- Wheel base 1950 mm
- Track width 1450 mm
- Operating weight without attachment 4350 kg
- Ground clearance - vehicle centre 420 mm
- rear axle gear 300 mm
- Turning radius (across the rear) 3800 mm
- Articulation angle - left 40 °
- right 40 °
- Climbing ability with payload 60 %
- Max. lifting capacity 34 kN
3.1.2 Engine
- Oil-/air-cooled diesel engine
- 4 cylinders, 4-stroke, direct injection
- Displacement 2732 cm
3
- Power acc. to ISO 9249 37 kW at 2300 rpm
3.1.3 Starter
- 2.2 kW, 12 V
3.1.4 Alternator
- 60 A, 14 V
3.1.5 Hydrostatic traction drive
- Stage I 0........7 km/h
- Stage II 0......20 km/h

Table of Contents

Related product manuals