8.3.Open Door Tone Configuration
You can not only enable or disable the Open Door Tone but also control the
prompt words that accompanies the tone on the web Phone > Audio > Open
Door Tone Setting interface.
Parameters Set-up:
● Open Door Inside Tone: select the checkbox to enable the open door inside
tone. Open door inside tone is what you can hear when you open the door by
pressing the Exit button in side.
● Open Door Outside Tone: select the checkbox to enable the open door
outside tone. Open door outside tone is what you can hear when you are
granted door access via various access methods on the door phone.
● Open Door Failed Tone: enable the open door failure tone.
8.4.Upload Tone Files
8.4.1.Upload Ringback Tone
You can customize the ringback tone if you need. Please follow the prompt about
the file size and format. Navigate to Phone > Audio > Tone Upload interface.
To Next Page
Loading...
Need help?
General
