4. Introduction to Configuration Menu
● Status: this section gives you basic information such as product information,
Network Information, and account information, etc.
● Account: this section concerns SIP account, SIP server, proxy server,
transport protocol type, audio&video codec, DTMF, session timer, etc.
● Network: this section mainly deals with DHCP&Static IP setting, RTP port
setting, and device deployment, etc.
● Intercom: this section covers Intercom settings, Call Log, etc.
● Surveillance: this section covers Motion Detection, RTSP, MJPEG, ONVIF,
Live stream.
● Access Control: this section covers Input control, Relay, Card settings, Face
Recognition setting, Private PIN Code, Wiegand connection, etc.
● Tenants: this section involves Tenants management and Dial Plan.
● Device: this section includes Light settings, tab&button display, LCD settings
and Voice settings.
● Settings: this section includes Time&language, Action settings, Door
settings, Schedule for access control.
● Upgrade: this section covers Firmware upgrade, device reset&reboot,
configuration file auto-provisioning, fault#Diagnosis.
● Security: this section is for Password modification.
●
Mode selection :
1. Discovery mode: it is a plug and play configuration mode. Akuvox devices
will configure themselves automatically when users power on the devices
and connect them to network. It is a super time-saving mode and it will
To Next Page
Loading...
Need help?
General
