10.7.Configure Calling Feature
10.7.1.DND
DND ( Do not disturb) setting allows you not to be disturbed by any unwanted
incoming SIP calls. You can set up DND related parameters properly on the
device web Phone > Call Feature interface to block SIP calls you do not intend
to answer. In the meantime, you can also define the code to be sent to the SIP
server when you want to reject the call.
Parameter Set-up:
● Enabled: enable or disable the DND function. DND function is disabled by
default.
● Return Code When Refuse: select code to be sent to the caller side via SIP
server when you rejected the incoming call.
10.7.2.Manager Dial Call
Manger dial call consist of Robin call and group call. Manager Dial is used to
quickly initiate the pre-configured numbers by pressing the Management key on
door phone. You can create up 10 numbers. To do the configuration on the web
Intercom > Basic > Manager Dial interface.
To Next Page
Loading...
Need help?
General
