Akuvox door phone offer you many types of door access. You can configure them
on the device and web interface. Moreover, you can import or export the
configured files to maximize your RF card configuration efficiency.
15.1.IC/ID Card Control
You can enable or disable the IC and ID card function if needed. You can
navigate to Intercom > Card Setting > Card Type Support.
Parameter Set-up:
● IC Support Enabled: tick this feature to allow to use IC card for access door
access.
● ID Support Enabled: tick this feature to allow to use ID card for door access.
15.2.Configure Access Card Format
If you want to integrate with the third party intercom system in terms of RF card
door access, you can change the RF card code format to be identical with that
applied in the third party system. You can do this configuration on web Intercom
> Card Setting interface.
Parameters Set-up:
● IC CARD Display Mode: select the card code format for the IC card for the
To Next Page
Loading...
Need help?
General
