opening failure.
● Time: set the time range for the door logs you want to check.
● Index: the order of the call logs.
● Name: if it is a locally added key or card, the corresponding added name will
be displayed. If it is an unknown key or card, it will display Unknown.
● Code: if opening the door via PIN code, the corresponding PIN code will be
displayed. If opening the door via RF cards, the corresponding card number
will be displayed, and if the door is opened by HTTP command, it will be
empty.
● Type: if opening the door via PIN code, Password will be displayed. If
opening the door via RF cards, Card will be displayed, and if the door is
opened by HTTP command, HTTP will be displayed.
● Date: the date for opening the door.
● Time: the time for opening the door.
● Status: the door opening result Success or Failed.
19.Debug
19.1.System Log
To Next Page
Loading...
Need help?
General
