Parameter Set-up：
● Video Resolution: select the code resolution for the video quality among
four options: “CIF”, “VGA”, “4CIF” and “720P”. The default code resolution
is 4CIF.
● Video Bitrate: Video Bitrate: select video bit-rate among six options: “64
kbps”, “256kbps”, “512 kbps”, “1024 kbps”, “2048 kbps” according to
your network environment. The default video bit-rate is “2048 kpbs”.
● Video Payload: select the payload type (ranging from 90-118) to configure
audio/video configuration file. The default payload is 104.
11.4.Configure DTMF Data Transmission
In order to achieve the door access via DTMF code or some other applications,
you are required to properly configure DTMF on web Account > Advanced >
DTMF in order to establish a DTMF-based data transmission between the door
phone and other intercom devices for the third party integration.
Parameter Set-up:
● Type: select DTMF mode among five options: “Inband”, “RFC2833”,
“Info+Inband” and “Info+RFC2833” based on the specific DTMF
transmission type of the third party device to be matched with as the party for
receiving signal data.
To Next Page
Loading...
Need help?
General
