ALC AWS3377 - Android-Motion and Motion Area Options

— 60 —
REMOTE ACCESS
Motion and Motion Area Options
u
Tap the icon, then tap Remote
Setting to access the System
Setup screen.
v
Tap Motion Sensitivity. Tap
the desired camera and then set
the desired motion setting to PIR
(Uses Advance Motion settings),
PIR Low, PIR Mid or PIR High.
w
This Motion Mask feature will
allow you to mask areas of the
screen from detecting motion and
activating the motion detector
recording for that area. For
example, if a pet sets off the
sensor, you can mask the lower
areas that the pet would be visible
in, or if a tree branch moving in
the wind sets it off, you can mask
the areas where the tree branch is
in the video.
Tap Motion Area then tap the
desired camera . To un-mask a
block, simply tap it again; a check
will appear.