Accessories
8AL91446ENAA ed02 103 /113
First remove the keyboard and add-on if installed.
Use the recommended screws.
Depending on your country (United States), use a standard plate (not provided with the kit).
Put the support on the back side of the desk phone:
1. Place the two bottom support hooks at the top of the connector slot.
2. Use the dedicated screw to fix the supportt (PN: 1AD100020011, Length= 12
mm, Diameter= 14,5 mm).
1. Depending on the case:
o Insert the screws into the wall using the screw anchors.
o Attach the plate to the wall. To mount your phone on the wall, you need
to install a standard wall plate that you can easily find on the market.
Follow the manufacturer's instructions to install the wall plate on the
wall. When the wall plate is fixed, you can prepare your phone and
mount it on the wall.
2. Hang the assembled phone with support on the wall as described in the
picture.
Connect the desk phone to LAN port 2.
5.8 Third parties headset certified in Developer and Solution Partner
Program (DSPP)
The mission of the DSPP is to support a broad ecosystem of developers and partners throughout
the desk phone lifecycle. In this context, certification tests are performed between partner
applications or devices and Alcatel-Lucent Enterprise’s platforms. It certifies proper inter-working
with partner applications or devices.
Consult the list of available headsets: “List of certified 3rd parties Headsets for Hard phones and
Soft phones.”.
To Next Page
