You can switch between different audio mode during your conversation by
pressing the loudspeaker/hands-free key and selecting an audio mode to
activate (handset, headset, hands-free, external hands-free, etc). The audio
modes available will depend on which devices are connected.
To select the audio mode:
• Tap on the desired audio mode icon (touch screen).
• Use the navigation keys to select the desired audio mode icon.
• Press successively on the loudspeaker/hands-free key until the desired
audio mode icon is selected.
The selected audio mode will be activated after a few seconds have elapsed.
The key slowly flashes blue when loudspeaker or hands-free mode is selected
(1)
.
This feature depends on connected devices.
(1)
In 'legacy' mode, the key lights up continuously in blue
For example: you are in conversation using the handset and you want to switch to the headset.
•
• The current audio mode is selected: .
• Select the headset audio (tap on the icon or use the navigation keys or press successively on
the loudspeaker key until the headset is selected): .
• The headset will be activated after a few seconds have elapsed and you will then be able to
use it for your conversation.
You can adjust the volume during a conversation in each audio mode (percentage). The selected
volume, for each audio mode, will be saved for future conversations.
• During a conversation.
• Adjust the volume by using the Smart Pad (rotating clockwise or counter
clockwise).
To Next Page
Loading...
