Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

Boot Option Files
7210 SAS M, X Basic System Configuration Guide Page 143
#uplinkB Port Settings:
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-vlan 0
#System Settings:
wait 3
persist on
console-speed 115200
===============================================================================
*A:ALA#
*A:ALA# show bof booted
===============================================================================
System booted with BOF
===============================================================================
primary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
secondary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
tertiary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/both.tim
primary-dns 135.254.244.204
dns-domain in.lucent.com
ping-address 10.135.16.90
#uplinkA Port Settings:
uplinkA-port 1/1/1
uplinkA-address 192.168.1.11/24
uplinkA-vlan 0
uplinkA-route 10.135.0.0/16 next-hop 192.168.1.1
#uplinkB Port Settings:
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-vlan 0
#System Settings:
wait 3
persist on
console-speed 115200
===============================================================================
*A:ALA#
A:7210-SAS>show# bof
===============================================================================
BOF (Memory)
===============================================================================
primary-image ftp://*:*@135.254.170.29//import/panos_builds/nightly/0.0/
I943/MTU-sultan/
primary-config tftp://10.135.25.100/MTU/mtu4-Ver2-0-SFPgash.cfg
secondary-config tftp://10.135.25.100/MTU/mtu4-ver-5-SAP.cfg
#eth-mgmt Port Settings:
no eth-mgmt-disabled
eth-mgmt-address 10.135.25.98/24
eth-mgmt-route 10.135.0.0/16 next-hop 10.135.25.1
eth-mgmt-route 135.0.0.0/8 next-hop 10.135.25.1
eth-mgmt-route 135.254.0.0/16 next-hop 10.135.25.1
eth-mgmt-autoneg
eth-mgmt-duplex full
eth-mgmt-speed 100
#uplinkA Port Settings:
uplinkA-port 1/1/24
uplinkA-address 10.135.25.98/24
uplinkA-vlan null
uplinkA-route 10.135.0.0/16 next-hop 10.135.25.1
uplinkA-route 135.254.0.0/16 next-hop 10.135.25.1
#uplinkB Port Settings:

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English