Security Command Reference
Page 128 7705 SAR OS System Management Guide
The system name can be added to an existing message without affecting the current
pre-login-message.
The no form of the command removes the message.
Default no pre-login-message
Parameters login-text-string — a text string, up to 900 characters. Any printable, 7-bit ASCII characters can be
used. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
name — when the keyword name is defined, the configured system name is always displayed first in
the login message. To remove the name from the login message, the message must be cleared and
a new message entered without the name.
FTP Login Control Commands
ftp
Syntax ftp
Context config>system>login-control
Description This command creates the context to configure FTP login control parameters.
inbound-max-sessions
Syntax inbound-max-sessions value
no inbound-max-sessions
Context config>system>login-control>ftp
Description This command configures the maximum number of concurrent inbound FTP sessions.
This value is the combined total of inbound and outbound sessions.
The no form of the command reverts to the default value.
Default 3
Parameters value — the maximum number of concurrent FTP sessions on the node
Values 0 to 5
To Next Page
Loading...
