Alcatel-Lucent 7705 SAR-8 - Page 129

Security
7705 SAR OS System Management Guide Page 129
Telnet Login Control Commands
telnet
Syntax telnet
Context config>system>login-control
Description This command creates the context to configure the Telnet login control parameters.
inbound-max-sessions
Syntax inbound-max-sessions value
no inbound-max-sessions
Context config>system>login-control>telnet
Description This parameter limits the number of inbound Telnet sessions. Each 7705 SAR router is limited to a
total of 7 Telnet or SSH sessions.
The value controls inbound Telnet sessions only. Console sessions though the local serial (console)
port cannot be disabled.
The no form of the command reverts to the default value.
Default 5
Parameters value — the maximum number of concurrent inbound Telnet sessions, expressed as an integer
Values 0 to 7
outbound-max-sessions
Syntax outbound-max-sessions value
no outbound-max-sessions
Context config>system>login-control>telnet
Description This parameter limits the number of outbound Telnet sessions. Each 7705 SAR router is limited to a
total of 7 Telnet or SSH sessions.
The value controls Telnet outbound sessions only. The local serial port cannot be disabled.
The no form of the command reverts to the default value.
Default 5