SNMP
7705 SAR OS System Management Guide Page 179
Parameters count — the number of unsuccessful SNMP attempts allowed for the specified time
Default 20
Values 1 to 64
time minutes1 — the period of time, in minutes, that a specified number of unsuccessful attempts can
be made before the host is locked out
Default 5
Values 0 to 60
lockout minutes2 — the lockout period, in minutes, during which the host is not allowed to log in.
When the host exceeds the attempted count times in the specified time, then that host is locked
out from any further login attempts for the configured time period.
Default 10
Values 0 to 1440
community
Syntax community community-string [hash | hash2] access-permissions group group-name
no community community-string
Context config>system>security>snmp
Description This command creates SNMP community strings for SNMPv1 and SNMPv2c access. This command
is used in combination with the predefined access groups and views. To create custom access groups
and views and associate them with SNMPv1 or SNMPv2c access, use the usm-community
command.
When configured, community implies a security model for SNMPv1 and SNMPv2c only.
For SNMPv3 security, the
snmp command must be configured.
The no form of the command removes a community string.
Default none
Parameters community-string — configures the SNMPv1/SNMPv2c community string
access-permissions —
• r — grants only read access to objects in the MIB, except security objects
• rw — grants read and write access to all objects in the MIB, except security objects
• rwa — grants read and write access to all objects in the MIB, including security objects
• mgmt — assigns a unique SNMP community string to the management router
hash1 | hash2 — configures the hashing scheme for the community-string
To Next Page
Loading...
