Alcatel-Lucent 7705 SAR-8 - Page 261

Event and Accounting Logs
7705 SAR OS System Management Guide Page 261
Parameters eq | neq — the operator specifying the type of match. Valid operators are listed in the table below.
application-id — the application name string
Values atm, chassis, debug, efm_oam, filter, gsmp, ip, ldp, logger, mpls, ntp, oam, port,
ppp, qos, route_policy, security, snmp, stp, svcmgr, system, tip, tod, user, user_db,
vrtr
number
Syntax number {eq | neq | lt | lte | gt | gte} event-id
no number
Context config>log>filter filter-id>entry entry-id>match
Description This command adds a TiMOS application event number as a match criterion.
TiMOS event numbers uniquely identify a specific logging event within an application.
Only one number command can be entered per event filter entry. If multiple number commands are
entered, the last command overwrites the previous command.
The no form of the command removes the event number as a match criterion.
Default no event-number
Parameters eq | neq | lt | lte | gt | gte — this operator specifies the type of match. Valid operators are listed in the
table below.
Operator Notes
eq Equal to
neq Not equal to
Operator Notes
eq Equal to
neq Not equal to
lt Less than
lte Less than or equal to
gt Greater than
gte Greater than or equal to