Event and Accounting Logs
7705 SAR OS System Management Guide Page 267
Values 0 to 23
level
Syntax level syslog-level
no level
Context config>log>syslog syslog-id
Description This command configures the syslog message severity level threshold. All messages with severity
level equal to or higher than the threshold are sent to the syslog target host.
Only a single threshold level can be specified. If multiple level commands are entered, the last
command will overwrite the previous command.
The no form of the command reverts to the default value.
11 ftp
12 ntp
13 log-audit
14 log-alert
15 cron2
16 local0
17 local1
18 local2
19 local3
20 local4
21 local5
22 local6
23 local7
Numerical Code Facility Code
To Next Page
Loading...
