Alcatel-Lucent ALE-300 - Programming Keys for Call Numbers and Functions (Perso Page;F1 and F2 Keys;Add-On Keys)

OmniPCX Enterprise - Release R100.1
Update of User Manual of ALE-300 DeskPhone in Attendant mode TC3046 ed.02
© Copyright 2023 ALE International, ALE USA Inc. page 28/75
2.7 Programming keys for call numbers and functions (Perso page/F1
and F2 keys/Add-on keys)
If your desk phone is equipped with the magnetic keyboard, use it to enter letters. If not,
use the alphanumeric keyboard to enter letters. Use the alphanumeric keyboard key to switch
between the numeric and alphabetic keyboard. When in alphabetic mode, the LED corresponding to
the key remains lit up.
Depending on your desk phone, you can program:
• Softkeys of the Perso page.
• Keys/softkeys of the add-on module.
• F1 and F2 keys.
• Abc' key in case a magnetic keyboard is connected (ALE-300, ALE-100).
• , Hold key (ALE-500)
(1)
.
• , Transfer key (ALE-500)
(1)
.
• , Conference key (ALE-500)
(1)
.
(1)
This preset key depends on the system configuration to suit each specific country, e.g: the
United States. In the event that these keys are used for the hold, transfer and conference
features, they are not programmable.
The following functions and services can be set on a softkey:
• Line key: make calls using a specific telephone line.
• Speed dial key (direct call key): dial a pre-defined phone number.
• Function key: access special features such as voicemail, call transfer, call hold, conference,
do not disturb, etc.
• Hunt group key: enter or exit a hunt group. The hunting group enables calls to be
distributed from a single number to a group of several phone numbers. If your phone
number is part of a hunting group, it can be reached via the hunting group number.