Alcatel-Lucent ALE-300 - Routing Participants to a Meet-Me Conference; The Conference Circuit Is Free; The Conference Is in Progress

OmniPCX Enterprise - Release R100.1
Update of User Manual of ALE-300 DeskPhone in Attendant mode TC3046 ed.02
© Copyright 2023 ALE International, ALE USA Inc. page 49/75
3.9 Routing participants to a Meet-Me conference
An attendant cannot take part in a meet-me conference. An attendant can add a participant in a
meet-me conference if the conference circuit is not fully busy or can reserve a conference circuit in
order to add different participants (maximum of 29) to this conference.
If the attendant is involved in routing actions to a conference, the attendant can no longer respond
to internal or external calls. The normal and urgent waiting calls counters are, however, updated.
• When a participant enters the conference, an audible beep signals their entry to the other
participants during the conversation.
• If an external trunk is alone in the conference, it will be forwarded to the attendant set after
a timer.
• However, if another participant joins the conference call, this timer is canceled.
3.9.1 The Conference Circuit is Free
When a conference circuit is free (no conference established), the attendant can call a first
participant.
Meet me conf: when the attendant is in conversation, he/she can press the Meet me conf softkey
and dial the conference number. The user is connected to the conference. To add other
participants, the attendant follows the same procedure seen previously.
3.9.2 The Conference is In Progress
Meet me conf: when the conference is in progress and the attendant is in conversation with a
party, he/she can press the Meet me conf softkey and dial the conference number to add this user
to the conference.