Alcatel-Lucent ALE-300 - Network;Network Transfer

OmniPCX Enterprise - Release R100.1
Update of User Manual of ALE-300 DeskPhone in Attendant mode TC3046 ed.02
© Copyright 2023 ALE International, ALE USA Inc. page 55/75
4.7 Network/Network Transfer
This feature is used to interconnect two external callers via the installation, while retaining the ability
to release the connection.
When this feature is programmed by the system administrator, he/she can put the Network/Network
Transfer key on the Perso page or on the extension module (ALE-120, EM200 or virtual module on
ALE-500).
Following an incoming call, the attendant makes an outgoing call to a party. The first party is
automatically put on hold.
On the Perso Page
On extension module (ALE-120, AM-200 or
virtual module on ALE-500)
1.
The following page is displayed: Next.
2. Open the Perso page (select the tab or
use the left navigation key).
3. Net/Net
The two parties are connected and
supervision is activated.
In steady state.
4. Net/Net
Press the key again.
The attendant barges in the conversation
after a barge-in tone.
Flashes.
5. Net/Net
Press the key again.
The attendant is back to supervision.
In steady state.
1. Net/Net
The two parties are connected and
supervision is activated.
In steady state.
2. Net/Net
Press the key again.
The attendant barges in the conversation
after a barge-in tone.
Flashes.
3. Net/Net
Press the key again.
The attendant is back to supervision.
In steady state.