Alcatel-Lucent ALE-300 - Sending a Calibrated Cut-Off or Flash; Temporary Hold of Automatic Transfer

OmniPCX Enterprise - Release R100.1
Update of User Manual of ALE-300 DeskPhone in Attendant mode TC3046 ed.02
© Copyright 2023 ALE International, ALE USA Inc. page 52/75
4.3 Sending a calibrated cut-off or flash
This feature sends a calibrated cut-off or flash on the line before sending dialed digits in
transparency mode.
Flash: Pressing the Flash softkey sends a calibrated pulse to the remote piece equipment. This
remote equipment can then return a tone inviting the attendant to continue dialing.
4.4 Temporary hold of automatic transfer
If the automatic transfer mode is activated, the current call is automatically transferred to a free
user after the attendant has dialed the user number.
The feature is enabled when the checkbox next to the feature label is validated.
When receiving an external call while the Automatic transfer is enabled, deactivate temporarily the
automatic transfer by pressing on the softkey: Transfer off.