Alcatel-Lucent ALE-300 - Management from the Attendant Set; Selecting Answer and Transfer Operating Modes; Selecting Answer Operating Mode; Selecting Transfer Operating Mode

OmniPCX Enterprise - Release R100.1
Update of User Manual of ALE-300 DeskPhone in Attendant mode TC3046 ed.02
© Copyright 2023 ALE International, ALE USA Inc. page 61/75
5 Management from the attendant set
This chapter describes the specific customization of the Attendant set. For general customization,
please refer to user manual of the set (key program, language, ringing, brightness, password, …).
5.1 Selecting Answer and Transfer Operating Modes
5.1.1 Selecting Answer Operating Mode
Auto answer: Pressing this softkey in the Perso page activates or deactivates the feature
• Auto answer feature enabled when the checkbox next to the Auto answer label is validated:
any incoming call is answered automatically when the attendant is free.
• Auto answer feature disabled when the checkbox next to the Auto answer label is not
validated.
5.1.2 Selecting Transfer Operating Mode
Auto transfer: Pressing the Auto transfer softkey in the Perso page activates or deactivates the Auto
transfer feature.
5.2 Selecting the Attendant Group Status
For more information on attendant groups, see your system administrator.
This feature can be inhibited or assigned to the attendant set with or without password by the
system administrator. In the example below, this feature is assigned to the attendant set without
password by the system administrator.
1. Reach the 'Menu' page.
2. Service → Group status