OmniPCX Enterprise - Release R100.1
Update of User Manual of ALE-300 DeskPhone in Attendant mode TC3046 ed.02
© Copyright 2023 ALE International, ALE USA Inc.
page 43/75
Pressing the softkey name of the caller retrieves the call on hold.
If the attendant does not retrieve the call before the end of the timer:
• Ringing is activated to indicate that the user is calling back the attendant set.
• The Alarm LED of the attendant set flashes in red (located at the top or at the back of the
set).
• The call on hold is also displayed in the page:
next.
• The attendant is considered as absent and the set status is put to signed off state.
To Next Page
Loading...
