Alcatel OmniPCX Enterprise User Manual

23
CC AA LL LL SS
When the conference initiator hangs up, all parties are disconnected, ending the
casual conference.
PPaarrkkiinngg aa ccaallll
You can park an external call in order to retrieve the call at a different terminal.
To park a call:
(1) During the call, to start a 2nd call, then
enter the code for the
""PPaarrkk CCaallll//rreettrriieevvee""
feature.
(2) Per the voice guide, dial the station number of the terminal on which you want
to take the call - the call is automatically parked, and your caller hears a hold
signal.
Note: If you hang up without specifying a destination, the parked call remains at the original
station, and can be recovered using the Park Call/Retrieve feature in the normal fashion at
the original station (or at any other station within the system).
To recover your parked call at the destination station:
Enter the code for the
""PPaarrkk CCaallll//rreettrriieevvee""
feature,
To recover your parked call at any other station in the system
:
(1) Enter the code for the
""PPaarrkk CCaallll//rreettrriieevvee""
feature,
(2) Dial the extension number where the call was parked.
Note: If a call is parked for more than the predefined period of time, it is automatically sent
to the attendant or other designated number within the system.
LINE

Alcatel OmniPCX Enterprise Specifications

General

System Type	IP PBX
VoIP Protocols	SIP, H.323
Voice Codecs	G.711, G.729
Networking	IP
Redundancy	Yes
Unified Communications	Yes
Integrated Applications	Voicemail, Conferencing
Network Interfaces	Ethernet
Humidity	10% non-condensing