Alde Compact 3010 - Page 14

14
8. Button sound
Withthisfunction,youcanactivateor
deactivatethebuttonsound.
Thebuttonsoundisactivatedinthefactory
setting.
9. Screen Brightness
Brightness:Thebrightnessofthedisplay
(workingmode)canbeadjustedfrom1to
10.Factorysettingis5.
Standbybrightness:
Off:Usedtoturnthedisplay’sbacklight-
ingoffsothatthedisplayisturnedoff
(becomesdark)instandbymode(theLED
isstillactive).
On:Usedtoactivatethebacklightinginthe
display(lowlighting)instandbymode(the
LEDisstillactive).FactorysettingisOn.
10. Language
Thisfunctionisusedtoresetthescreen
betweendifferentlanguages.Availablelan-
guagesare:English,FrenchCanadian.On
theotherhand,theservicemenuisonlyin
English(seesection10.1).
Lan
11. Tools / Key
UnderTools/Keyyoucanlockorunlock
accesstothetoolmenu.
12. Celsius / Fahrenheit
ChangetemperaturefromCelsiusto
Fahrenheit.
13. *Load monitor
Thisfunctionisusedtopreventthe120V
breakerbeingoverloaded.Ifthetotal
powerconsumptionofthevehicleexceeds
thesetvalue,theboiler’spowerwillbe
automaticallyreduced.Onaccountofvolt-
agevariationsandtolerances,differentset-
tinglevelscanbeselected(forexample,
for20Abreaker,onecanchoose18,20
or22Ampsetting).Ifthebreakerdoesnot
hold,choosealowersetvalue.Thefunc-
tionisdeactivatedinthefactorysetting.
Amp
C/F
NOTICE
The load monitor has to be installed
for the function to be used (see the
manual for the vehicle).