8.6. Driver Management
Up to six drivers can be set, the factory settings include the first driver named "Alfano 7"
and drivers 2/3/4/5/6, all names are editable
The name of the driver is linked to the session registration. When downloading the data in
ADA, the session is linked to the name of the pilot selected at the start of registration
For endurance races where multiple drivers drive the same vehicle, it is possible to change
the driver while recording a session. Refer to page 28 for further details
8.6.1. DRIVER SELECTION
To change the driver associated with data
recording, select the driver using the lower
and upper left buttons and confirm by
pressing the 'ok' button
Once you confirm the desired driver, the
device will return to the homepage
The new driver's name will be visible at the
top center of the screen
8.6.2. DRIVER’s NAME CHANGE
To rename a pilot, select them and press the
central right button
The keyboard will open, allowing you to
rename the driver
56
8. Settings
To Next Page
Loading...
