Rockwell Automation Publication 2094-UM001J-EN-P - March 2017 25
Chapter 2
Plan the Kinetix 6000 Drive System Installation
This chapter describes system installation guidelines used in preparation for
mounting your Kinetix® 6000 drive components.
Topic Page
System Design Guidelines 26
Electrical Noise Reduction 34
ATTENTION: Plan the installation of your system so that you can perform all
cutting, drilling, tapping, and welding with the system removed from the
enclosure. Because the system is of the open type construction, be careful to
keep any metal debris from falling into it. Metal debris or other foreign
matter can become lodged in the circuitry, which can result in damage to
components.
To Next Page
Loading...
