Allen-Bradley PLC-5 User Manual

Publication 1785-UM012D-EN-P - July 2005
D-18 Instruction Set Quick Reference
File Copy
COP
When the input conditions are true, the controller copies
the contents of the Source file (N7) into the Destination file
(N12). The source remains unchanged. The COP instruction
copies the number of elements from the source as specified
by the Length.
As opposed to the MOV instruction, there is no data type
conversion for this instruction.
File Fill
FLL
When the input conditions are true, the controller copies
the value in Source (N10:6) to the elements in the
Destination (N12). The FLL instruction only fills as many
elements in the destination as specified in the Length.
As opposed to the MOV instruction, there is no data type
conversion for this instruction.
Instruction Description
COP
COPY FILE
Source
Length
#N7:0
5
Dest #N12:0
FLL
FILL FILE
Source
Length
N10:6
5
Dest #N12:0

Allen-Bradley PLC-5 Specifications

General

Brand	Allen-Bradley
Model	PLC-5
Category	Controller
Language	English