Publication 1785-UM012D-EN-P - July 2005
Preface 3
Manual Overview
This manual has three main sections:
• Design
• Operate
• Maintain
Section: For information about: See Title:
Design An overview of the PLC-5 controllers’ capabilities and keyswitch Chapter 1 Understanding Your Controller
Guidelines for selecting and placing I/O modules Chapter 2 Selecting and Placing I/O
The proper environment for your PLC-5 system Chapter 3 Placing System Hardware
Choosing addressing mode, assigning rack numbers, and understanding
PLC-5 memory
Chapter 4 Addressing I/O and Controller Memory
Operate Configuring the controller for controller-resident I/O, transferring data, and
monitoring status
Chapter 5 Communicating with Controller-Resident I/O
Configuring a system for remote I/O communication, designing a remote
I/O link, transferring data, and monitoring status
Chapter 6 Communicating with Remote I/O
Configuring a PLC-5 adapter channel, transferring data, and
monitoring status
Chapter 7 Communicating with a PLC-5
Adapter Channel
For PLC-5/40L, -5/46L, and -5/60L Controllers only: Configuring an
extended-local I/O system, transferring data, and monitoring status
Chapter 8 Communicating with Extended-Local I/O
Configuring a system for Data Highway Plusâ„¢ and monitoring
channel status
Chapter 9 Communicating with Devices on a DH+ Link
Configuring a system for serial communications and monitoring
channel status
Chapter 10 Communicating with Devices on a
Serial Link
For PLC-5/20E, -5/40E, and -5/80E Controllers only:
Configuring a system for Ethernet communications and monitoring
channel status
Chapter 11 Communicating with Devices on an
Ethernet Network
Assigning passwords and privileges Chapter 12 Protecting Your Programs
PLC-5 programming feature overview Chapter 13 Programming Considerations
Defining power-up procedure Chapter 14 Preparing Power-Up Routines
Defining, programming, and monitoring fault routines Chapter 15 Preparing Fault Routines
Configuring and monitoring main control programs Chapter 16 Using Main Control Programs
Using, defining, and monitoring selectable timed interrupts Chapter 17 Using Selectable Timed Interrupts
Using, defining, and monitoring Controller input interrupts Chapter 18 Using Controller Input Interrupts
Maintain System specifications Appendix A System Specifications
Listing of the controller status file words and meaning Appendix B Controller Status File
General and specific performance considerations Appendix C Maximizing System Performance
Guide to ladder instructions and execution times Appendix D Instruction Set Quick Reference
How to set system switches Appendix E Switch Setting Reference
Potential problems and recommended solutions Appendix F Troubleshooting
Guidelines for choosing and making cables Appendix G Cable Reference
To Next Page
Loading...
Need help?
General
