Chapter 6: Basic Switch Management Commands
130 Section II: Basic Operations
SHOW BAUD-RATE
Syntax
show baud-rate
Parameters
None.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the settings of the Console port, used for
local management sessions of the switch. Here is an example of the
information.
Figure 32. SHOW BAUD-RATE Command
To set the baud rate, refer to “BAUD-RATE SET” on page 116.
The baud rate is the only adjustable parameter on the Console port.
Example
This example displays the settings of the console port:
awplus# show baud-rate
Asynchronous Port (Console) Information:
Baud Rate .................... 9600
Parity ....................... User Configured
Data bits .................... 0
Stop bits .................... 1
To Next Page
Loading...
