Chapter 35: LACP Commands
478 Section V: Port Trunks
SHOW PORT ETHERCHANNEL
Syntax
show port etherchannel
port
Parameters
port Specifies the port of an aggregator. You can display
more than one port at a time.
Mode
Privileged Exec mode
Description
Use this command to display the LACP port information. Figure 90
illustrates the information. Refer to the IEEE 802.3ad standard for
definitions of the fields.
Figure 90. SHOW PORT ETHERCHANNEL Command
Example
awplus# show port etherchannel port1.0.5
Port ............. 05
Aggregator ....... LACP sw22
Receive machine state: Default
Periodic Transmission machine state: Fast periodic
Mux machine state: Detached
ACTOR PARTNER
============================================
Actor Port ............. 05 Partner Port ......... 00
Selected ............... SELECTED Partner System ....... 00-30-84-AB-EF-CD
Oper Key ............... 0xf705 Oper Key ............ 0xff07
Oper Port Priority .... 0x0005 Oper Port Priority ... 0x0007
Individual ............. NO Individual ........... NO
Synchronized............ YES Synchronized.......... YES
Collecting ............ YES Collecting ........... YES
Distributing ........... YES Distributing ......... YES
Defaulted .............. NO Defaulted ............ NO
Expired ................ NO Expired .............. NO
Actor Churn .......... YES Partner Churn ........ YES
To Next Page
Loading...
